Roberts DreamTime Specifications download pdf (Page 6)

Operating your clock radio

1. Press the On / Standby button to switch on your clock radio.

When ﬁ rst switched on, the radio will be in DAB mode. After each use

the radio will remember the mode used and then switch on in that

mode the next time that it is used.

2. If the clock radio has been used before, the last used station will be

selected.

3. If this is the ﬁ rst time that the clock radio has been used a quick scan

of the Band III DAB channels will be carried out. During the scanning

process the display will show the progress of the station search. The

number on the right of the display is the number of stations that have

been found.

4. When the scan is completed the ﬁ rst station (in numeric-alpha order

0...9, A...Z will be selected. The ﬁ rst station in the list of stations found

during scanning will be played. The display will show the station name.

5. If no signals are found then 'OFF AIR' will be displayed and it may

be necessary to relocate your clock radio to a position giving better

reception. You should then carry out a scan to ﬁ nd stations as described

on page 9.

• Your clock radio has an indicator

on the display to indicate the

strength of the DAB radio signal being received.

Note: When ﬁ rst switched on, the radio will set the volume to a moderately

high level, in case the broadcast is very quiet. After you have set the volume

using the Volume Up or Down buttons, the radio will remember the setting

that you have applied for the next time that it is used.

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

No comments

Roberts DreamTime Specifications Page 6