Roberts STREAM 83I Instruction Manual download pdf (Page 11)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Conﬁ guration

Plugging in and language selection

1. Place your sound system on a ﬂ at surface and plug the cable from the

mains adaptor into the DC input socket located at the rear of your

sound system (marked 'DC in') ensuring that the plug is pushed fully

into the socket.

2. If you wish to use a wired network connection, plug the Ethernet cable

into the RJ-45 socket at the back of the sound system.

3. Plug the mains adaptor into a wall socket and switch on the socket.

IMPORTANT: The mains adaptor is used as the means of connecting

the radio to the mains supply. The mains socket used for the radio

must remain accessible during normal use. In order to disconnect the

radio from the mains, the mains adaptor should be removed from the

mains socket outlet completely.

4. When you apply power, the display on the radio will light up and say:

'ROBERTS' and 'STARTING' with a progress indicator. The ﬁ rst time

that you use your sound system (or after a Factory Reset) the display

will show 'Setup wizard' and 'YES' will be highlighted on the screen.

5. By default your radio will display all menus and messages in English.

If English is your preferred language then press the Tuning/Select

control to select 'YES' and to begin setting up your sound system.

Then please skip to step 1 on page 10.

6. If your preferred language is not English, then rotate the Tuning/

Select control so that the 'NO' option is highlighted.

Press the Tuning/Select control to enter the selection.

Continue on the next page.

5,6

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 107 108

No comments

Roberts STREAM 83I Instruction Manual Page 11