Roberts CRD-39 User's Guide download pdf (Page 27)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Connecting to an external ampliﬁ er or recorder

You can connect your radio to an external ampliﬁ er or recorder. This may

be a stand-alone unit or it may be part of your existing hi-ﬁ system.

1. Connect the optical toslink connector to the optical input socket(s) on

your ampliﬁ er or recorder using a suitable cable.

Recording from your radio

Your radio has ﬁ ve alarm/timers which can be set to switch on your radio

at a preset day, time, and station. See section on page 21 for details on

how to set alarm/timers

1. A programme/station can be recorded to an external device via the

optical toslink connector located on the rear of your radio. Connect

the optical toslink connector to the optical input socket(s) on your

recorder using a suitable cable.

Most mini disc units have a record pause mode that enables the mini

disc to start recording as soon as a signal appears on the mini disc

input. When your radio switches on controlled by the alarm timer the

mini disc will start recording.

Subsequent timer events are then recorded onto track 2,3, etc. Consult

your hi-ﬁ or mini disc user guide for further details. The volume on

your radio can be set to 0 so that you will not be disturbed during the

recording. The volume control does not affect the recording level.

Note: The timer record function is for personal use only.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

No comments

Roberts CRD-39 User's Guide Page 27