Roberts ecologic1 User Manual download pdf (Page 29)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Nap timer

The Nap timer facility allows you to set your radio to wake you after a

predetermined interval (up to 2 hours) without needing to set the alarm.

The nap timer can be set when your radio is switched on or in stand-by

mode. The nap timer should only be used when the radio is powered from

the mains. The radio's clock does not operate when the radio is in standby

and powered solely from its batteries.

1. Press the On/Off button to switch on the radio if required.

2. Press the Menu button once or twice as needed until "Main Menu"

appears on the display. Rotate the Tuning/Select control until "Utility"

shows on the display.

3. Press and release the Tuning/Select control to enter the Utility menu

and rotate until "Nap" appears on the display. Press and release the

Tuning/Select control to enter Nap timer setup.

4. Rotate the Tuning/Select control until the required Nap time setting

is selected. Press Tuning/Select control to conﬁ rm the setting. The

Nap timer can be set to between 5 and 120 minutes (in 5 minute

increments) or to Off.

5. The Nap Timer indicator

will show on the display when in

stand-by mode. When the selected Nap timer has elapsed, the buzzer

will sound.

6. To cancel the buzzer press the On/Off button.To disable the Nap timer

go back into the Nap timer settings (steps 1 to 4 above) and select

the Off option in step 4.

2-6

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Roberts ecologic1 User Manual Page 29