Roberts ecologic1 User Manual download pdf (Page 34)

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press the On/Off button to switch on the radio.

2. Press the Menu button once or twice as needed until "Main Menu"

appears on the display. Rotate the Tuning/Select control until "Set

up" shows on the display.

3. Press the Tuning/Select control to enter the Set up menu and rotate

until "Factory Reset" appears on the display. Press and release the

Tuning/Select control. Rotate the Tuning/Select control and highlight

'Yes' to proceed.

If you do not wish to carry out a system reset, highlight "No" and then

press the control.

4. With "Yes" highlighted, press the Tuning/Select control. A full reset will

be performed. The station list and presets will be erased. The alarm

setting will be cancelled, display brightness and sleep timer settings

will be set to their default values. The clock will be reset and the unit

will behave as when ﬁ rst switched on (see page 6).

In case of malfunction due to electrostatic discharge, reset the product

as described above to resume normal operation. If you are not able to

perform the reset operation as above, removal and reconnection of the

power supply and batteries may be required.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

2-4

1 2 ... 29 30 31 32 33 34 35 36

No comments

Roberts ecologic1 User Manual Page 34